How to Find and Fix Hot and Cold Spots

If you find that you have hot and cold spots through your Bossier City home, you’re not alone. This is a fairly common problem. While it may seem like a major problem, the good news is that the typical causes of hot and cold spots are usually easy to fix with a straightforward air conditioning service. The most common causes for hot and cold spots are:

  • No zoning or improper zoning
  • Poorly designed or ineffectively sized duct systems
  • Leaky or inadequately insulated air ducts
  • The wrong size of HVAC equipment

Lack of Zoning or Improper Zoning
A zoning system breaks up your home into separate areas, known as “zones,” and allows you to set the air temperature in each zone. The system is composed of multiple thermostats that run dampers inside the ductwork of your forced-air system. The thermostats are working nonstop, reading the temperature of their assigned zone, then open or close the dampers to meet the thermostat's settings. This may be the missing link to keeping that one cold bedroom warm in the winter, or that smoldering sunroom comfortable all summer. Plus, when you utilize it with a programmable thermostat, zoning can mean home energy savings of up to 35 percent.*

Poorly Designed or Ineffectively Sized Duct Systems
Some homeowners experience hot and cold spots simply because their home’s duct system is not sized appropriately for the room that needs heated and cooled, or it’s poorly designed. We find this is fairly commonplace in homes that were built before much of today’s tools and training were used. Unfortunately, even the most energy-efficient HVAC equipment can’t meet homeowners’ expectations if the duct system isn’t letting it do its job. In fact, a shoddy duct system could actually cause new equipment to work more frequently than necessary and shorten its life cycle. The experts at Brooks Heating and Air Conditioning can help you determine if your duct work is working for your home.

Leaky or Inadequately Insulated Air Ducts
Even if your duct system is designed and sized properly for your home, it may still be at the root of your home’s hot and cold spots. It’s normal for the ducts in a home to become leaky over time. Pros like Brooks Heating and Air Conditioning can check your ducts and let you know if they ought to be sealed. They could also find that your ducts aren’t leaking, but they’re not properly insulated. Fortunately, this is also a fairly easy fix.

Improperly Sized HVAC Equipment
So possibly your air duct system is just fine and you have a good zoning system, but you’re still noticing hot and cold spots throughout your home. Improperly sized HVAC equipment could be the cause. A system that is too small has to run harder to heat or cool your home, meaning you have hot and cold spots because it can’t take care of the amount of space it needs to condition. Even a system that’s too big can leave you with problems because it’ll cycle on and off too often to do its job properly.

No matter what’s causing the hot and cold spots in your home, Brooks Heating and Air Conditioning can help. Just give us a call at 800-COOLING and we’ll help you decide what the issue is and decide if you need air conditioning service, or any other types of HVAC service that could help you keep your home comfortable. 

 
 
*Source: U.S. Department of Energy statistics
Back To Blog